#Atari 400 emulator mac download#
If you have a 3D printer you can download the STL files for a few different cases here.Īny flex cable with 5 or more cores of 20-24 AWG wire will work. Search for the chip name along with your “UNO Screen” search term, I’ve found the ILI9341 is very common.
#Atari 400 emulator mac free#
Other people have used 2.4″ displays with success but there are currently no free 2.4″ cases designs available. I’ve had two MCUFriend displays, neither of which had working touch panels, other people have similar experiences. Elegoo 2.8″ TFT displays are recommended by the project developers and indeed I’ve had good experiences with the Elegoo display myself. The problem is, finding out which chip is used by a given screen, usually involves buying the screen and trying it.
#Atari 400 emulator mac driver#
The SDrive-MAX software supports five different driver chips, the ILI9341, ILI9340, ILI9329, HX8347i, and HX8347g. Which screen you can use is dictated by the chip the screen uses as a driver. The Arduinos in the Baduino column would all work but for various reasons they are a pain to use. The rest should be similar to the Bestduino in implementation. I will be covering the Arduino at the top of the Gooduino column, and the Bestduino at the bottom, as they are two distinctly different builds. ArduinoĪny Arduino UNO R3 should work, but there are lots of variations, some are easier for making an SDrive-MAX, some are harder work. It’s up to you to decide if you want to put that effort in.Īpart from the 3D printed stuff, all the parts can be acquired from Amazon, eBay, Aliexpress and other similar stores in most localities around the world. There are simple workarounds for that, which will make the SDrive-MAX a good neighbour, but it does require a little more effort to make. By default the SDrive-MAX ties up the SIO bus of your Atari no other devices plugged in to SIO will work. The SDrive-MAX is a simple device to make, there is a little soldering but nothing above beginner level. The SDrive-NG led to the creation of the SDrive-MAX in 2017 by kbr. This spurred the creation of a couple of improved versions the SDrive-NUXX in 2009 by c0nsumer, the SDrive Micro in 2012 by santosp, the SDrive-NG in 2014 by kbr and the SDrive 2 in 2017 by alsp. It won the Abbuc hardware contest that year and the schematics, source code, and designs were all released publicly. The History of the SDrive-MAXīack in 2008, Bob!k (Robert Petružela) & Raster (Radek Štěrba) of CPU, created the original SDrive. If after reading all of this, you still feel that making the SDrive-MAX is too complicated, at the end of the page is a list of all the community members who sell devices pre-made, or in kits. Each section is self contained so you can skip forward without missing anything important. The Making part is the longest (by far!) as there are so many possible routes. The SDrive-MAX software is still in active development. The SDrive-MAX can load executable XEX files as if they were on read-only bootable disks, and can match the timing of both the 8 floppy disk drives, allowing it to load ATX flux copied disks with copy protection still in place.
The SDrive-MAX allows you to read and write ATR and CAS files on real Atari hardware as though they were real disks and cassettes. The SDrive-MAX is an Arduino based floppy disk and cassette drive emulator for the Atari 8-bit range of computers.